Product ID:031T0000, T-31 EPOXY THINNER
MSDS Date:05/12/1988
FSC:8010
NIIN:00N017917
MSDS Number: BNQGT

DEVOE COATINGS COMPANY

4000 DUPONT CIRCLE
LOUISVILLE, KY 40207
US

Emergency Phone: 502-897-9861;800-424-9300(CHEMTREC)

Info Phone: 502-897-9861

Cage: 1HK86

DEVOE COATINGS CO

7600 LOUISVILLE, KY 40207-4802 US

Telephone: 502-897-9861

Cage: 1HK86

WELDING, BRAZING & SANDING MATERIAL COATED W/THIS

RTECS: 9999999ZZ

STDS IN MIXING, APPLICATN & CURING AREAS & TO REMOVE

RTECS: 9999999ZZ

WELDING & FLAME CUTTING ON SURFS COATED W/PROD. VAPS

RTECS: 9999999ZZ

SOLVENT VAPORS FROM LOWER LEVELS OF WORK AREA.

RTECS: 9999999ZZ

AREAS, WEAR NIOSH/MSHA APPRVD AIR SUPPLY RESPS/USE

RTECS: 9999999ZZ

5.9.

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 40%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

10.

CAS: 64742-95-6

Fraction By Weight: 60%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

IGNITE. DURING EMER CNDTNS OVEREXP TO DECOMP PRODS

RTECS: 9999999ZZ

NON-SPARKING TOOLS. STORE IN CLOSED CONTAINER

RTECS: 9999999ZZ

CONTINUOUS FLOW OF FRESH AIR. DO NOT STORE

RTECS: 9999999ZZ

COMPLY W/OSHA 1910.106. KEEP CNTNR CLSD WHEN NOT IN

RTECS: 9999999ZZ

UNLABELLED CNTNRS. DO NOT REUSE EMPTY CNTNRS. IF MATL

RTECS: 9999999ZZ

CONVERTOR PORTIONS WILL HAVE HAZS OF BOTH COMPONENTS.

RTECS: 9999999ZZ

APPRVD CHEM/MECH FILTER DESIGNED TO REMOVE

RTECS: 9999999ZZ

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:IRRIT OF RESP TRACT; HDCH,
NAUS, DIZZ, WEAK & FATIGUE. EXTREME EXPOS CAN RESULT IN
UNCONSCIOUSNESS & EVEN RESP ARREST. SKIN/EYE CONTACT:CAUSES IRRIT.
MAY BE HARMFUL IF ABSORBED THRU SKIN. INGEST:CAN CAUSE STOMACH
&/OR INTESTINAL IRRIT, NAUS, VOMIT & DIARR. CHRONIC:REPORTS HAVE
ASSOC RPTD & (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:PRLNG OCCUP OVEREXP TO SOLVS W/PERM
BRAIN & NERV SYS DMG. PRLNG/RPTD BRTHG OF SPRAY MIST &/OR SANDING
DUST OVER PERIOD OF YRS MAY CAUSE DUST DISEASE OF LUNGS. ASPIR OF
VOMITUS CAN CAUSE CHEM PNEUM WHICH CAN BE FATAL. INTENT MISUSEBY
DELIB CONC & INHALING CONTENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:NONE, WHEN USED I/A/W SAFE HANDLING
& USE INFORMATION.

First Aid:INHAL:IF YOU EXPER DFCLTY IN BRTHG, LEAVE AREA TO OBTAIN
FRESH AIR. IF CONTINUED DFCLTY IS EXPERD, CALL MD IMMED. IF BRTHG
CEASES, RESTORE USING APPRVD CPR TECHNIQUES & CALL MD IMMED.
EYES:FLUSH IMMED W/LG AMTS OF H*2O FOR @ LST 15 MINS. GET MD.
SKIN:WASH AFFECTED AREAS W/SOAP & H*2O. REMOVE SOILED CLTHG. GET MD
IF IRRIT PERSISTS. INGEST:CALL MD IMMEDIATELY. DO NOT INDUCE
VOMITING.

Flash Point Method:SCC
Flash Point:97.0F,36.1C
Lower Limits:1%
Extinguishing Media:IN CASE OF FIRE USE CO*2, DRY CHEM, FOAM/OTHER NFPA
APPRVD METH FOR TREATING A CLASS B FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. SUMMON PROFESSIONAL FIREFIGHTERS. WATER SPRAY MAY BE INEFTIVE. IF
WATER IS USED, FOG NOZZ PREF. IF(SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & FLAME. VAPS MAY CAUSE FLASH FIRE. VAPS MAY
IGNITE EXPLOSIVELY. VAPS MAY SPREAD LONG DIST(SUPDAT)

Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT (FLAMES, HOT SURFS
& ELEC, STATIC/FRICTIONAL SPKS). PVNT BRTHG OF VAPS. VENT AREA.
BEFORE ATTEMPTING CLEAN-UP, REFER TO HAZ CAUT INFO IN OTHER SECTS
OF ORIGINAL MSDS. CONTA IN SPILLED MATL & REMOVE W/INERT ABSORB&
(ING 4)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT BREATHE VAPS/SPRAY MIST/SANDING
DUST. DO NOT GET ON SKIN/IN EYES. KEEP AWAY FROM HEAT, SPKS,
FLAMES. DO NOT SMOKE. VAPS MAY IGNITE EXPLOSIVELY.
Other Precautions:EXTING ALL PILOT LIGHTS & TURN OFF ALL SOURCES OF
IGNIT INCL HEATERS, FANS & OTHER NON-EXPLO-PROOF ELEC EQUIP, DURING
USE & UNTIL ALL VAPS ARE GONE. VAPS MAY SPREAD LONG DIST & BEYOND
CLSD DOORS. PVNT BUILD-UP OF VAPS BY MAINTAINING (ING 5)

Respiratory Protection:WHEN SPRAY APPLIED IN OUTDOOR/OPEN AREAS &
DURING SANDING/GRINDING OPERATIONS, USE NIOSH/MSHA APPRVD MECH
FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY &
SANDING DUST. WHEN USED IN RESTR ICTED VENT AREAS, USE NIOSH/MSHA
(ING 9)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP AIR CONTAM CONC BELOW CURRENT APPLIC SAFETY & HLTH (ING 12)
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SOLVENT IMPERMEABLE CLOTHING & BOOTS TO
PREVENT SKIN CONTACT ARE RECOMMENDED.
Work Hygienic Practices:REMOVE & WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING & SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:EXPOSED TO FIRE/EXTREME HEAT, H*2O SHLD BE USED TO COOL
CLSD CNTNRS & PVNT PRESS BUILD-UP/POSS AUTO-IGNIT. EXPLO HAZ:&
BEYOND CLSD DOORS. DUE TO PRESS BUILD-UP, CLSD CNTNRS EXPOSED TO
EXTREME HEAT MAY EXPLODE. NEVER USE WELDING/CUTTING TORCH ON/NEAR
CNTNR (EVEN EMPTY) AS PROD/ITS RESIDUE MAY (ING 3)

HCC:F4
Boiling Pt:B.P. Text:>244F,>118C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE TOXIC FUMES WHEN HEATED TO
DECOMPOSITION. FUMES MAY CONTAIN CO, CO*2.

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE & FEDERAL
REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.